Conservative Dentistry – Part I · MU Plovdiv

7. Instruments for cavity preparation. Tooth numbering systems.

Inside: 7 sections · 1 table · 6 min

Essay 7 of 53 in the MU Plovdiv syllabus for Conservative Dentistry – Part I (Dental Medicine, Year 3). The free AceMed note covers it in 7 sections, about 851 words (6 min of reading).

In this note

  1. Introduction
  2. Classification of instruments in operative dentistry
  3. Hand cutting instruments: design and Black's nomenclature
  4. Individual hand instruments and their uses
  5. Rotary instruments: handpieces and burs
  6. Alternative and supplementary methods
  7. Tooth numbering systems

Introduction

Cavity preparation uses hand cutting instruments, rotary instruments (handpieces and burs) and some alternative methods, each with a standard design and naming system. Tooth numbering systems let clinicians record exactly which tooth was treated.

Classification of instruments in operative dentistry

  • Examination instruments: mirror, explorer (e.g. No. 23 shepherd's hook), periodontal probe, tweezers. A suspected fissure lesion must not be probed forcefully, as this can cavitate it.
  • Hand cutting instruments: excavators and chisels.
  • Rotary instruments: handpieces and burs, diamonds, finishing and polishing instruments.
  • Restorative (non-cutting) instruments, named only: amalgam carrier, condensers (pluggers), carvers, burnishers, plastic filling instruments, matrices. Alternative cutting methods are in section 5.

Hand cutting instruments: design and Black's nomenclature

A hand instrument has a handle, a shank and a blade (working end) with its cutting edge. Shanks may be straight, monangle, binangle or triple-angle (contra-angle), so that the cutting edge stays within about 2 mm of the handle axis for balance. Instruments are made of stainless or carbon steel, sometimes with tungsten-carbide inserts.

  • Black's naming: the order gives the purpose (excavator, chisel); the suborder the position or manner of use (push, pull); the class the form of the working end (hatchet, hoe, spoon); the subclass the shank angles (mon-, bin-, triple-angle).
  • Black's instrument formula uses angles in centigrades (a circle = 100 units). Three numbers give blade width (in 0.1 mm), blade length (mm) and blade angle to the handle axis. In four numbers the cutting-edge angle is inserted as the second number. For example "10-85-8-14" means width 1.0 mm, cutting-edge angle 85, length 8 mm, blade angle 14.
  • Bevels are single (right or left) or bibevelled.
  • Grasps: modified pen, inverted pen, palm-and-thumb, modified palm-and-thumb. Always use a finger rest and keep instruments sharp.

Continue reading free

The whole note, all 7 sections, is free with an AceMed account. Standard adds flashcard recall, highlights and Ask AI.