Dental Materials · MU Plovdiv

10. Factors that affect the colour determination. Metamerism.

Inside: 7 sections · 1 table · 7 min

Essay 10 of 85 in the MU Plovdiv syllabus for Dental Materials (Dental Medicine, Year 1). The free AceMed note covers it in 7 sections, about 738 words (7 min of reading).

In this note

  1. Introduction
  2. The colour triad and why colour determination varies
  3. Light-source factors
  4. Observer factors
  5. Object factors: the tooth and the restoration
  6. Environmental factors and contrast effects
  7. Metamerism

Introduction

The shade a dentist sees is not fixed in the tooth. It results from the light source, the object, the observer and the surroundings working together. Controlling these factors, and recognising metamerism, is what makes a shade match hold under every light.

The colour triad and why colour determination varies

Perceived colour depends on the light source, the object and the observer, plus the environment. Changing any one changes the perceived colour. Visual shade determination is subjective, so its conditions must be standardised. Instrumental (objective) determination is the alternative to the eye.

Light-source factors

  • Spectral power distribution: which wavelengths a lamp emits, and how much of each.
  • Correlated colour temperature (K): a low value looks warm (red–yellow), a high value looks cool (blue).

Common sources:

  • Incandescent (tungsten) light is about 2700–3000 K (CIE illuminant A = 2856 K). It is rich in red and yellow and poor in blue, so teeth look warmer.
  • Fluorescent light usually has excess blue–green and too little red. This varies by tube.
  • Natural daylight changes with time of day, season, weather and window orientation. Midday, overcast or north light is classically the most balanced. CIE D65 is average daylight at 6500 K.

The colour rendering index (CRI) runs from 0 to 100 and shows how faithfully a lamp renders colours. Colour-corrected shade lights of about 5500 K with CRI ≥ 90 are recommended.

Intensity matters too. If the light is too dim, the rods take over and hue discrimination is lost. If it is too bright, glare results, which is why the dental operating light is moved away during shade selection.

Continue reading free

The whole note, all 7 sections, is free with an AceMed account. Standard adds flashcard recall, highlights and Ask AI.