Introduction
We test a metal or alloy to link its structure to its properties and to its behaviour in the mouth, and to check that it meets the standards. The methods are destructive or non-destructive, and they fall into structural, thermal and physical, mechanical, chemical and corrosion, technological and biological groups.
Classification of the methods
- By effect on the specimen: destructive methods (tensile test, hardness, metallography) and non-destructive methods (radiography of castings, density, colour measurement).
- By property studied: structural (macro and micro), thermal and physical, mechanical, chemical analysis with corrosion and tarnish, technological (castability, fit, solderability, metal-ceramic bond) and biological.
The reason this matters is that structure (grain size, phases, porosity) controls both the mechanical properties and the corrosion behaviour.
Macroscopic and metallographic (microscopic) examination
Macroscopic examination uses the naked eye or low magnification. It shows fracture surfaces, colour, large pores, shrinkage cavities and inclusions.
Specimen preparation for microscopy follows a fixed order:
- sectioning the sample
- mounting in resin
- grinding on silicon-carbide papers of finer and finer grit
- polishing with diamond paste or alumina
- etching with a reagent that suits the alloy, for example an aqua-regia-based reagent for gold alloys and HF-HNO₃ (Kroll's reagent) for titanium. Etching reveals grain boundaries and phases.
Optical (light) microscopy works up to about x1000. It shows grains and grain boundaries, dendrites and coring in as-cast alloys, second phases and eutectic, inclusions and micro-porosity. Grain size matters: finer grains give a higher yield strength and more uniform properties, which is why grain refiners are added to casting alloys.
- Scanning electron microscopy (SEM) gives high magnification and great depth of field. It is used for fracture surfaces (fractography). With energy-dispersive X-ray spectroscopy (EDS/EDX) it also gives the local chemical composition.
- X-ray diffraction (XRD) identifies the crystal lattice (FCC, BCC, HCP), the phases present and any ordering, for example the ordered Au-Cu phase.