Introduction
Pure gold is the most noble and the most ductile dental metal, but it is too soft for most restorations, so it is alloyed. The gold content of an alloy is stated as carat, as fineness or as weight per cent. This topic covers pure gold, the carat and fineness scales, the classification of gold alloys, the role of each element, heat treatment, and the use of the alloys.
Pure gold as a dental metal
- Atomic number 79, FCC lattice, yellow colour, density 19.3 g/cm³, melting point 1064 °C.
- The most ductile and malleable metal, and very soft.
- Chemically inert: it forms no oxide and does not tarnish or corrode in the mouth. It dissolves only in aqua regia (and in cyanide solutions). Biocompatibility is excellent.
Uses of pure gold:
- direct-filling gold in the form of foil, mat (sponge) and powdered gold. Cohesive gold is annealed ("degassed") just before condensation so that it welds cold.
- electroformed copings and gold coatings
Why alloy it: to raise strength, hardness and proportional limit, to lower the melting range and to lower the cost.