Introduction
Ceramic and metal-ceramic restorations are shaped by one of a small number of processing routes: sintering of condensed powder, heat-pressing, casting, or machining (CAD/CAM). The route determines fit, porosity, strength and aesthetics. This topic is about how the restoration is made, not about the composition of the porcelain or the alloy.
Classification of dental ceramics by processing method
The basis is how the ceramic is formed into the restoration. The usual groups are:
- Powder-liquid, condensed and sintered: feldspathic veneering porcelain, built on metal, on a refractory die or on platinum foil.
- Heat-pressed: leucite-reinforced and lithium disilicate glass-ceramics.
- Cast: castable glass-ceramic (historical).
- Slip-cast and glass-infiltrated: In-Ceram type cores.
- Machined (CAD/CAM): blocks of feldspathic ceramic, glass-ceramic, zirconia, hybrid and resin materials.
- Additive manufacturing: emerging.
There are two main restoration families: metal-ceramic (porcelain fused to a cast or milled metal coping) and all-ceramic, which is either monolithic or a ceramic core with a veneer. The standard ISO 6872 (Dentistry - Ceramic materials) groups ceramics by clinical indication and sets a minimum flexural strength for each class.