Introduction
Artificial (denture) teeth replace the natural crowns in removable prostheses. Nearly all are made either of acrylic resin or of porcelain. The two are manufactured differently, attach to the denture base differently, and behave very differently in the mouth.
Requirements and classification of artificial teeth
An artificial tooth must have a natural appearance and colour stability, be biocompatible, attach securely to the base, resist wear and fracture adequately, be easy to adjust and be dimensionally stable.
- By material: porcelain; acrylic (conventional PMMA, highly or double cross-linked, interpenetrating polymer network or IPN); filled composite resin teeth.
- By occlusal form: anatomic (cusp angle about 30-33 degrees), semi-anatomic or modified (about 20 degrees), non-anatomic or flat (0 degrees).
- By position: anterior or posterior.
Fabrication of acrylic (resin) teeth
- Made industrially from PMMA with a higher cross-linker content than denture-base resin, which gives better craze, solvent and wear resistance.
- Shaped by compression or injection moulding under heat and pressure in metal moulds, in successive layers (cervical or dentine shade and incisal or enamel shade) so that the colour changes gradually.
- Pigments and opacifiers are used, and the surface is high-gloss.
- IPN and composite teeth have improved wear resistance.