Introduction
High-copper amalgams are made from alloys with 6% copper or more (usually 12–30%). They were developed from the 1960s onwards. The extra copper takes up the tin, so that the weak, corrosion-prone γ2 (Sn–Hg) phase is eliminated or greatly reduced. This gives higher early strength, lower creep and better marginal integrity than traditional amalgams.
Definition and classification
High-copper amalgam alloys have a copper content of 6% or more, and most contain 12–30%. Copper content is the basis of the low/high division. Standards are ADA Specification No. 1 and ISO 24234. By how the copper is added and how the particles are made up, there are two types:
- Admixed (dispersion-strengthened, blended), introduced by Innes and Youdelis (1963). Low-copper lathe-cut Ag–Sn particles are blended with spherical Ag–Cu eutectic particles (about 72% Ag, 28% Cu). The overall copper content is about 9–20%.
- Single-composition (unicompositional): every particle has the same Ag–Sn–Cu composition, and the particles are usually spherical. Ag is about 40–60%, Sn about 22–30% and Cu about 13–30%. These alloys may be ternary or quaternary, with small amounts of In or Pd.