Dental Materials · MU Plovdiv

74. Thermoplastic modeling materials.

Inside: 7 sections · 1 table · 6 min

Essay 74 of 85 in the MU Plovdiv syllabus for Dental Materials (Dental Medicine, Year 1). The free AceMed note covers it in 7 sections, about 679 words (6 min of reading).

In this note

  1. Introduction
  2. Definition and classification of modelling materials
  3. Modelling (impression) compound: composition and types
  4. Properties, manipulation and use of compound
  5. Shellac baseplates
  6. Thermoplastic sheets for vacuum and pressure forming
  7. Comparison, advantages and disadvantages of the group

Introduction

Thermoplastic modelling materials soften reversibly on heating and harden on cooling, with no chemical reaction. They are used to shape patterns, record bases, trays and appliances. Besides waxes, the main ones are modelling (impression) compound, shellac baseplates and thermoforming polymer sheets.

Definition and classification of modelling materials

Modelling materials form the shape (pattern, base, tray) of a future restoration or appliance. By the way they harden they fall into two groups:

  • thermoplastic: hardening is physical and reversible; heat softens, cooling hardens;
  • chemically setting: for example autopolymerizing pattern acrylic and light-cured resin base and tray materials, mentioned here only as a contrast.

The thermoplastic group contains waxes (see the topics on dental waxes), modelling (impression) compound, shellac and thermoplastic polymer sheets. They share these features:

  • no setting reaction, so they can be reshaped by reheating;
  • low thermal conductivity, so they need thorough heating and complete cooling;
  • high thermal expansion and contraction;
  • stress relaxation, so they distort with time and heat;
  • they soften again at raised temperature, so they must be kept away from hot water and heat.

Continue reading free

The whole note, all 7 sections, is free with an AceMed account. Standard adds flashcard recall, highlights and Ask AI.