Preclinical Prosthetic Dentistry · MU Plovdiv

44. Fabrication of a gypsum fixator with “a key”.

Inside: 7 sections · 1 table · 5 min

Essay 44 of 96 in the MU Plovdiv syllabus for Preclinical Prosthetic Dentistry (Dental Medicine, Year 1). The free AceMed note covers it in 7 sections, about 670 words (5 min of reading).

In this note

  1. Introduction
  2. Purpose and principle
  3. Materials and instruments
  4. Preparing the models
  5. Building the fixator and the key
  6. Errors and their consequences
  7. Indications, limits and comparison

Introduction

A gypsum fixator is a plaster block that joins the upper and lower working models in central occlusion. It lets them be taken apart and put back in exactly the same relation for laboratory work when no occluder or articulator is used. The key is the interlocking index between its two halves that guarantees this repositioning. It is a simple, cheap, static device.

Purpose and principle

  • It keeps the models in the registered central occlusion (intercuspal position) while crowns and other fixed work are modelled.
  • It reproduces only the static relation (opening and closing back to the same position), not the eccentric movements of the mandible (protrusion, laterotrusion).
  • The block is built in two parts, separated by an insulating (separating) layer and locked by a key: a projection on one part fits a recess (a V-shaped or conical notch) in the other.
  • It is compared below with the occluder (simple hinge) and the articulator, which also reproduces movements.

Continue reading free

The whole note, all 7 sections, is free with an AceMed account. Standard adds flashcard recall, highlights and Ask AI.