Dental Materials · MU Plovdiv

13. Technological properties of materials.

Inside: 7 sections · 1 table · 7 min

Essay 13 of 85 in the MU Plovdiv syllabus for Dental Materials (Dental Medicine, Year 1). The free AceMed note covers it in 7 sections, about 769 words (7 min of reading).

In this note

  1. Introduction
  2. Definition and place among material properties
  3. Casting properties (castability)
  4. Pressure working: malleability, ductility, cold working
  5. Joining: solderability and weldability
  6. Machinability, polishability and response to heat treatment
  7. Technological properties of non-metallic materials

Introduction

Technological (processing) properties describe how a material behaves when it is shaped, joined, machined and finished. They decide which laboratory or clinical method can be used, and they are separate from the physical, mechanical, chemical and biological properties of the finished restoration.

Definition and place among material properties

Material properties fall into physical, mechanical, chemical, biological and technological groups. The technological group covers behaviour during processing: casting, pressure working, joining, cutting, finishing and heat treatment for metals, and mixing, setting and firing for non-metals.

  • They depend on composition, structure (grain size, phases) and temperature. The same alloy can be easy to cast but hard to machine.
  • Main technological properties of metals: castability, malleability, ductility, cold workability, weldability and solderability, machinability, polishability and response to heat treatment.
  • Relevant standards: ISO 22674 (metallic materials for fixed and removable restorations and appliances), ISO 9333 (dental brazing materials) and ISO 9693 (metal-ceramic systems).

Casting properties (castability)

Castability is the ability of the molten alloy to fill the mould completely and reproduce fine detail, giving a sound, dense casting. It depends on:

  • fluidity of the melt (low viscosity);
  • melting temperature or range: a narrow range or a single melting point casts better;
  • surface tension and wetting of the mould;
  • density: dense gold alloys fill moulds more easily than light base-metal and titanium alloys;
  • mould temperature.

Casting shrinkage is the thermal contraction from the solidus temperature to room temperature. It is about 1.25-1.65% for gold alloys and about 2.3% for Co-Cr, and it is compensated by expansion of the investment.

Defects linked to poor casting properties are incomplete casting, porosity (shrinkage and gas porosity), segregation and hot tears. The melt can also absorb gas: molten silver dissolves oxygen and releases it on solidifying ("spitting"), and palladium (to a lesser degree platinum) absorbs hydrogen. This is why correct flame adjustment and melting technique matter.

Continue reading free

The whole note, all 7 sections, is free with an AceMed account. Standard adds flashcard recall, highlights and Ask AI.