Dental Materials · MU Plovdiv

14. Classification of dental materials.

Inside: 7 sections · 1 table · 5 min

Essay 14 of 85 in the MU Plovdiv syllabus for Dental Materials (Dental Medicine, Year 1). The free AceMed note covers it in 7 sections, about 575 words (5 min of reading).

In this note

  1. Introduction
  2. Dental materials science and why classify
  3. Classification by chemical nature and bonding
  4. Classification by role in fabrication
  5. Classification by clinical application and duration
  6. Classification by biological behaviour
  7. Classification through standards (specifications)

Introduction

Dental materials are the substances used to prevent disease, restore, replace and fabricate oral structures and appliances. Because there are hundreds of them, they are grouped by several independent criteria: chemical nature, purpose, clinical use, duration and biological behaviour. Each criterion answers a different practical question.

Dental materials science and why classify

Requirements common to all dental materials: biocompatibility, adequate strength, chemical stability in saliva, aesthetics, easy manipulation and acceptable cost.

  • International standardization is led by ISO Technical Committee 106 "Dentistry". Terms are defined in ISO 1942 (Dentistry - Vocabulary). In the USA the ANSI/ADA specifications are used.
  • No single classification is complete, so a material is usually described by several at once. Zirconia, for example, is a ceramic, a basic (structural) material, used indirectly, permanent and bioinert.

Classification by chemical nature and bonding

  • Metals and alloys: metallic bond; conduct heat and electricity, ductile, opaque, can corrode. They include pure metals and noble and base alloys.
  • Ceramics: ionic and covalent bonds; hard, brittle, chemically inert, aesthetic and insulating. They include glass-based ceramics, glass-ceramics such as lithium disilicate, and polycrystalline alumina and zirconia.
  • Polymers: long covalent chains held together by secondary bonds; light, low modulus, low thermal conductivity, and they may absorb water. Examples are PMMA and elastomeric impression materials; waxes are organic materials placed here.
  • Composites: two or more chemically different phases with a distinct interface, for example a resin matrix, inorganic filler and a silane coupling agent. They combine the properties of the phases.

Some texts add a fifth group of natural or other materials, such as gypsum and waxes; here they are simply placed in the groups above.

Continue reading free

The whole note, all 7 sections, is free with an AceMed account. Standard adds flashcard recall, highlights and Ask AI.