Introduction
Investing means surrounding the sprued wax pattern with a refractory investment material inside a casting ring. When the wax is burned out, a heated mould cavity remains, ready to receive the molten alloy. This is the core of the lost-wax casting technique, introduced to dentistry by Taggart in 1907. The topic covers the purpose of the mould, spruing, rings and liners, mixing, expansion techniques, burnout and mould-related defects.
Purpose of investing and requirements of the investment mould
The goal is an exact, slightly enlarged negative of the pattern. The enlargement compensates for the casting (solidification) shrinkage of the alloy: about 1.4–1.7% for gold alloys (pure gold about 1.67%) and about 2.3% for Ni–Cr and Co–Cr alloys.
The mould must:
- reproduce fine detail with a smooth surface;
- give enough controlled expansion;
- be strong enough to resist the force of the casting and stay stable at casting temperature;
- be permeable, so that air and gases can escape;
- not react with or contaminate the alloy;
- break away easily at divesting.
The expansion that offsets shrinkage has three sources: setting expansion, hygroscopic expansion and thermal expansion of the investment. The composition of the gypsum-, phosphate- and ethyl silicate-bonded investments is dealt with in the neighbouring topics.