Introduction
A flux is a material applied to metal surfaces during melting or soldering (brazing). It protects the metal from oxidation and removes oxides that are already present, so that the molten alloy or solder flows and wets cleanly. An antiflux does the opposite: it is applied to areas where the solder must not flow.
Definitions and the problem of oxidation
Heated metals react with oxygen. The base-metal constituents form surface oxide films: Cu, Zn, In and Sn in gold alloys, and Cr, Ni and Co in base-metal alloys.
- Oxides stop molten solder from wetting the parent metal.
- They also cause inclusions, porosity and weak joints.
- A flux prevents or removes these oxides and improves wetting, which shows as a low contact angle of the molten solder on the metal.
Dental "soldering" with gold solders is technically brazing, because it is done above 450 °C.
Classification of fluxes by their main action
- Surface protection: the flux covers the metal and keeps oxygen away.
- Reducing agent: reduces oxides already present back to metal (for example charcoal in melting fluxes).
- Solvent: dissolves the oxides that are present.
Most dental fluxes combine these actions. By use, they are divided into melting (casting) fluxes and soldering fluxes. By form they are powder, paste (flux in petroleum jelly) or liquid; a paste stays where it is placed and is easy to control.