Dental Materials · MU Plovdiv

81. Chemical cleaning of casting alloys- pickling.

Inside: 7 sections · 1 table · 5 min

Essay 81 of 85 in the MU Plovdiv syllabus for Dental Materials (Dental Medicine, Year 1). The free AceMed note covers it in 7 sections, about 599 words (5 min of reading).

In this note

  1. Introduction
  2. Why castings need cleaning
  3. Mechanism of pickling
  4. Pickling solutions
  5. Technique
  6. Cleaning by alloy type
  7. Safety and occupational hazards

Introduction

Pickling is the cleaning of a cast or soldered metal by putting it in an acid solution. The acid dissolves surface oxides, flux residues and leftover investment, so the casting is clean and bright and its fit can be checked before finishing.

Why castings need cleaning

After casting and soldering the surface carries several kinds of contamination:

  • an oxide film, from oxidation of the base-metal constituents (mainly copper in gold alloys) during melting, casting and heat treatment;
  • residual investment: gypsum, silica, phosphate;
  • flux residues: glassy borates left after melting or soldering;
  • sulfur compounds from overheated gypsum investment, which darken the surface.

The sequence after casting is brief:

  1. Divesting: for gold alloys the ring is quenched in water after the button loses its red glow, and the investment becomes soft and granular.
  2. Mechanical removal of investment with a brush, an ultrasonic bath or sandblasting.
  3. Chemical cleaning (pickling).

Mechanism of pickling

Acids react with metal oxides to give soluble salts and water. For example, copper oxide with hydrochloric acid gives copper chloride and water. The noble metal matrix (Au, Pt, Pd) is not attacked, so the surface comes out bright. Hydrochloric acid also helps to remove remaining investment. Warming the solution speeds the reaction, but it must not be boiled, because of the fumes.

Continue reading free

The whole note, all 7 sections, is free with an AceMed account. Standard adds flashcard recall, highlights and Ask AI.