Introduction
A model-cast (one-piece cast) bridge is a bridge whose retainers, pontic and connectors are modelled together in wax on the master model and cast as a single piece, with no solder joints. Its retainers may be full crowns or partial crowns that deliberately leave a chosen tooth surface uncovered.
Definition and comparison with soldered (assembled) bridges
The one-piece bridge is cast from a continuous wax pattern. The older alternative is a bridge assembled from separately made crowns and pontics that are joined by soldering. As an example in FDI notation, a bridge 44-46 replaces the missing tooth 45.
- Advantages: no solder joints (no weak, corrosion-prone joints between different alloys), higher strength and rigidity, accurate connector shape, fewer working steps.
- Disadvantages: shrinkage and distortion when long spans are cast, which may call for sectioning and soldering or laser welding; the whole framework must be remade if one unit fails; all abutments must share one path of insertion.
Clinical and laboratory prerequisites
- Abutments are prepared parallel to a common path of insertion, and parallelism is checked by surveying the model.
- Accurate impression; master model with removable (sawn, pinned) dies; antagonist model; occlusal registration and mounting on the articulator.
- Die hardener and die spacer are applied; the marginal zone is left unspaced so the margin fits closely.