Introduction
Aesthetic veneering (incrustation) covers the visible surfaces of a cast metal bridge framework with tooth-coloured resin or ceramic. This topic explains how each material is applied and how it is held on the metal: by mechanical, micromechanical, chemical and compressive retention.
Purpose and framework design for veneering in bridges
The aims are aesthetics and support of the veneer by the metal. Rules for the framework:
- it is modelled to full contour first, then cut back for an even veneer thickness;
- metal-veneer junctions lie away from occlusal contacts and form a clear angle (butt joint);
- connectors are rigid and high occluso-gingivally, and the embrasures are open.
Extent of veneering: anteriorly, full vestibular and incisal coverage; posteriorly, vestibular only with a metal occlusal surface, or full occlusal coverage in ceramic. On the pontic tissue surface, glazed ceramic is the best-tolerated material against the ridge, then highly polished metal; resin is the least favourable.
Historical and prefabricated facings
Earlier bridges used prefabricated porcelain or acrylic facings joined to a cast backing, such as pin facings and slotted interchangeable facings (Steele's facing). They were held by pins or slots and cementation. This is the background to modern veneering.