Prosthetic Dentistry – Part II · MU Plovdiv

3. Clinical cutting instruments

Inside: 7 sections · 1 table · 6 min

Essay 3 of 30 in the MU Plovdiv syllabus for Prosthetic Dentistry – Part II (Dental Medicine, Year 3). The free AceMed note covers it in 7 sections, about 791 words (6 min of reading).

In this note

  1. Introduction
  2. Classification
  3. Design and nomenclature
  4. Bladed burs: steel and tungsten carbide
  5. Diamond instruments
  6. Stones, discs and non-rotary cutting
  7. Principles of efficient and safe cutting

Introduction

Clinical cutting instruments remove tooth tissue and restorative materials during preparation. Fixed prosthodontics relies mainly on rotary instruments: bladed burs and abrasive diamonds. Hand instruments are used for finishing. Instruments are classified by how they cut, what they are made of, their shape and their size.

Classification

  • Hand cutting instruments: excavators, chisels, hatchets, hoes, gingival margin trimmers and angle formers.
  • Rotary instruments:
  • Bladed: cut by shearing and chip formation; steel burs and tungsten carbide burs.
  • Abrasive: cut by grinding; diamond instruments, stones and discs.
  • Other ways of cutting: sonic and ultrasonic oscillating tips, air abrasion, and the Er:YAG laser (named only).

Design and nomenclature

A hand instrument has a handle, a shank and a blade (nib) with a cutting edge. G. V. Black's formula uses three numbers: blade width in tenths of a millimetre, blade length in millimetres, and blade angle in centigrades. A fourth number, the cutting-edge angle in centigrades, is placed second when the edge is not at right angles to the blade.

A rotary instrument has three parts: shank, neck and head. Shank types (ISO 1797):

  • Friction grip (FG), 1.6 mm: for the turbine and the red-ring contra-angle.
  • Latch-type (RA/CA), 2.35 mm: for the contra-angle.
  • Straight handpiece (HP), 2.35 mm.

The ISO 6360 number code is made of groups of digits for the material (for example 806 = diamond, 500 = tungsten carbide), the shank type and total length (for example 314 = FG standard), the shape, the grit or blade type, and the head diameter in tenths of a millimetre (014 = 1.4 mm). The older US numbers (for example 330, 245, 169L) are still used but are not universal.

Continue reading free

The whole note, all 7 sections, is free with an AceMed account. Standard adds flashcard recall, highlights and Ask AI.