Dental Materials · MU Plovdiv

26. Heat treatment of alloys.

Inside: 7 sections · 1 table · 6 min

Essay 26 of 85 in the MU Plovdiv syllabus for Dental Materials (Dental Medicine, Year 1). The free AceMed note covers it in 7 sections, about 693 words (6 min of reading).

In this note

  1. Introduction
  2. Definition, aims and classification
  3. Annealing and homogenization
  4. Softening (solution) heat treatment of dental gold alloys
  5. Hardening (age) heat treatment of gold and other noble alloys
  6. Heat treatment of steels and other wrought alloys
  7. Heat treatment and metal–ceramic alloys

Introduction

Heat treatment is the controlled heating of a solid alloy to a set temperature for a set time, followed by controlled cooling. It changes the microstructure, and so the mechanical properties, without melting the alloy or changing its shape. In dentistry it matters mainly for gold casting alloys, steels for instruments and wires, and metal–ceramic alloys.

Definition, aims and classification

The aims are to relieve stresses, restore ductility, homogenize the composition, harden and strengthen the alloy, and prepare the surface (an oxide layer). By effect, treatments fall into three groups.

  • Softening treatments: stress-relief anneal, recrystallization anneal, homogenization, and solution (softening) heat treatment.
  • Hardening treatments: order and precipitation (age) hardening of noble alloys; quench hardening plus tempering of steels.
  • Special treatments: oxidation (degassing) firing of metal–ceramic alloys; shape setting of NiTi.

Three variables decide the result: temperature, soaking time and cooling rate (water quench, bench cooling or furnace cooling). Quenching freezes the high-temperature structure.

Annealing and homogenization

Annealing of cold-worked metal passes through recovery, recrystallization and grain growth; the mechanism belongs to the topic on cold working.

  • Stress-relief (recovery) anneal of bent orthodontic wires and appliances lowers residual stress, distortion and fracture risk without softening the wire.
  • Homogenization: a casting with a cored (non-uniform) structure is held just below the solidus for a long time. Diffusion then evens out the composition, and ductility and corrosion resistance improve. How coring forms is dealt with under solidification.

Continue reading free

The whole note, all 7 sections, is free with an AceMed account. Standard adds flashcard recall, highlights and Ask AI.