Introduction
Polysulfides (mercaptan or "Thiokol" rubber base) were the first synthetic elastomeric impression materials. They set by oxidation of mercaptan (–SH) groups, with water as a by-product. They have the highest tear strength and a long working time, but poorer dimensional stability, an unpleasant odour and a tendency to stain.
Classification and standard
- Polysulfide is an elastomeric (non-aqueous) impression material. It sets chemically and irreversibly, and is elastic once set. The reaction is of the condensation type, with water as the by-product.
- The standard is ISO 4823 (older ADA No. 19). The usual viscosity types are light-, medium- (regular) and heavy-bodied; a putty is not usually taught for polysulfide.
Composition
- Base paste (white): a liquid polysulfide polymer with terminal and pendant mercaptan (–SH) groups, which forms the major part. It also contains fillers (titanium dioxide, zinc sulphate, copper carbonate or silica) for strength and viscosity, and a plasticiser (dibutyl phthalate).
- Catalyst (reactor) paste (dark brown): lead dioxide as the oxidiser; dibutyl phthalate as vehicle and plasticiser; sulphur to promote the reaction; and small additives such as stearic or oleic acid (retarder) and a deodorant.
- Alternative catalysts to lead dioxide are an organic hydroperoxide (for example t-butyl hydroperoxide, which is volatile and gives poorer dimensional stability) and copper hydroxide (which gives a green colour).