Introduction
A telescopic (double) crown has a primary coping cemented on the abutment and a secondary crown that fits over it and forms part of the bridge. This lets non-parallel or periodontally weakened abutments share one path of insertion, and it makes the bridge removable by the dentist (or by the patient). Complicated bridges are those whose abutment arrangement (pier abutment, tilted teeth, cantilevers, several segments) needs a special design.
Telescopic crowns — definition, parts and types
- Primary (inner) coping: thin, milled with parallel or slightly tapered walls to a common path, and permanently cemented.
- Secondary (outer) crown: carries the veneer and is joined to the pontics and other retainers. It may be cemented provisionally (fixed-removable, or "conditionally removable") or be removable by the patient.
The types differ in how retention is obtained:
The same principle is used in telescope-retained removable partial dentures, which belong to the removable prosthodontics course.
Indications and contraindications for telescopic bridges
Indications:
- non-parallel (tilted) abutments, where parallel preparation would endanger the pulp
- periodontally reduced abutments that need secondary splinting and periodic control
- extensive bridges whose individual abutments have an uncertain prognosis: if one is lost, the prosthesis can be modified or converted
- planned future extension
Contraindications: short clinical crowns and limited interocclusal space (two layers plus veneer need more room); young teeth with large pulps (more reduction); the aesthetic zone, where bulk and metal margins are a problem; poor hygiene; a patient who cannot come for recalls.
- Advantages: a common path, splinting, retrievability, easy hygiene control of the abutments, and protection of the abutments by the copings.
- Disadvantages: more tooth reduction, bulk and overcontouring, cost, technical difficulty, and wear of the friction surfaces.